62-72 Mopar A Body Front Power Disc Brake Conversion Kit 5 x 4.5 Bolt #1530

Mopar A Body Disc Brake Wheel Kit Includes: 11" Standard Rotors with 5x4.5 Bolt Pattern       Loaded Large Calipers     Backing Plates     Stock Height Spindles     7/16 Rubber Brake Hoses      Bearings/ Seals / Dust Caps &  all Hardware     Lower Ball Joint & Steering Arm Replacements Brake Booster Conversion Kit     7" Single Black Brake Booster     Black firewall bracket & linkage     Cast Iron Master Cylinder     Adjustable Proportioning Valve w/ 3/8 fittings     Vacuum hose & fittings BRAND NEW Dodge/Plymouth A body disc brake kit REDESIGN Features all new parts that does NOT require you to change out your control arms. New Re-Design gives you a bolt on drum to disc conversion with all new lower ball joints!  ** NOTE***  Depending on what has been done to your engine over the years you may need to move the windshield washer fluid tank and re route those lines. The stock air filter that came with the v6 engines is a haus and you may need to convert to an aftermarket air cleaner to be able to get the clearance you need to install the kit.  The booster conversion kit is not OE style and is an after market product. The brake line tube nuts will not automatically screw in to the master cylinder and adapters will be needed. Our suggestion is to splice in a jumper line from the old location of the manual master cylinder on the firewall and run the lines the 15.5" inches you need to make it to the master. If you have a larger battery than what came stock with your car the unit may be 1" too long and may need to get a smaller battery to get the unit to fit. Applications: 62-72 Dodge/Plymouth A Body: Dart, Barracuda, Valiant, Scamp, Duster, Demon, Dart Sport, Swinger